A bowstring A bowstring designed to be used on longbows with smaller end loops to fit the string nocks and still able to slide down the smaller cross section limb.

A bowstring designed for use on recurve bows with larger endloops to facilitate the string loop to slide down the wider limbs when being unstrung with a center serving. They should have a center shooting serving.

A bowstring designed to be used on two wheeled compound bows and  crossbows with two wheels and string attachment points at the end of the steel cable, with a center shooting serving.

A bowstring designed to be used on compounds bows and crossbows that have string attachment points in both cams or between one cam and a double grooved idler wheel.

A steel or fabric assembly designed to fit from the back side of a cam bow to one point on the axle at the opposite end.

A steel or fabric assemble designed to attach to the back side of a cam and to  the axle on the opposite end of the bow at two points with a Y formation.

A bowstring designed to attach to the bottom cam at the shooting string attachment point, then go over the top idler wheel and down to the lower cam back string attachment point, with a shooting serving on the front side of the string and a serving at the point of the string that contacts the idler wheel.

A string assembly designed to reduce the length of a solocam string, and other  reasons, by dividing the string on a two groove top idler wheel with two string  post attaching to the idler wheel and going down to the lower cam back string attachment point. With no center serving

Hoyt Cam .5 & Darton CPS Bows

These one cam bows do not use the long strings like a standard one cam bow. The string is effectively split at the top cam, so there is a bowstrings and a control cable.

The bowstrings do not use the same length servings on both ends like a two cam bow uses, one serving being much longer. The bowstrings are in the same length range as a 2 Cam bowstring but are not interchangeable.

The remaining section of the one cam bowstring that would come from the back of the top wheel to the lower cam, is called a CONTROL CABLE. The control cable differs from a BUSS CABLE also due to much longer servings.

The power cable or yoke cable is the same specifications as a standard yoke cable and are interchangeable.

You may order crossbow string by manufacturers part number by checking on our reference chart.